DIBUTUHKAN SEGERA
Dinas Sosial, Tenaga Kerja dan Mobilitas
Penduduk Kabupaten Aceh Timur membuka kesempatan bagi putra putri Aceh untuk
mengisi beberapa posisi sebagai karyawan kontrak untuk pelaksanaan pekerjaan di
Proyek Blok A:
- ü Safety oriented, healthy and good personality
- ü Must have hands-on experience dealing with ICSS and its trouble shoot
- ü Min. 7 years of progressive experience In pre-commissioning, commissioning and plant start-up activities within Oil & Gas Industries (development and production)
- ü Abie to work independently (In long hours) with minimum supervise
- ü Conversant in English is a must
- ü Responsible to review Integrated Control and Safety System (ICSS) including several mechanical packages from Factory Acceptance Test (FAT), Construction, Pre-Commissioning and will be supporting Contractor Commissioning team as well.
- ü Understand Flawless risk (potential and counter measures) In Control System and shall able to monitor implemented of Flawless and Risk Management in its discipline (KSA Control/Plant Automation)
- ü Experience in attending integrated Control and Safety System (ICSS) Factory Acceptance Test
- ü Do Engineering document review such as Control Narrative, Cause and Effect, Vendor document, Loop drawing etc
- ü Capable to review work-packages procedure for tie-in & system upgrade.
- ü Capable to guide Contractor on how Populate Instrument Tags, loops folder, cause and effect to Pre-Commissioning database.
- ü Experience in reviewingDCS/linstrument pre-commlssioning check sheets.
- ü Has experience in reviewing System/sub system list up, boundary limit and document deliverables for Automation system
- ü Capable to assist Contractor construction activity for ICSS & other mechanical packages.
- ü Has experience in managing coordination with other discipline for pre-commissioning & commissioning plan, handover target & execution.
- ü Has capability to give positive input to Operation team for tie-in & shutdown activity preparation (if any)
- ü Manage ICSS upgrade activity & ICSS tie-in activity.
- ü Has capability to review test procedures eg.SAT, loop test & function test of Integrated Control & Safety System (ICSS) and other mechanical packages.
- ü Experience in reviewing and Inspecting all vendor packages and raise punch list and NCR's if required.
- ü Capable to advise Contractor in their dally commissioning activity
- ü Understand CMS - integrated data base for mechanical completion, pre-commissioning and commissioning test sheet and dossier for Commissioning Acceptance/Certificate.
- ü Understand with CSU PTW (LOTO, I A, LUN, Energy Isolation, etcetera)
ü Safety oriented, healthy
and good personality
ü Min. 7 years of
progresslveexperience in pre-commissionlng, commissioning and plant start-up
activities within Oil & Gas Industries (development and production)
ü Must have hands-on
experience dealing with various type of field instrument (hardware) and its
trouble shoot.
ü Able to work independently
(In long hours) with minimum supervise
ü Conversant in English is
a must
ü Capable to review and Instrument document eg.
Specification, Installation Details, Control Philosophy,Instrument Index,
Instrument I/O List, Trou
ü Understand Flawless risk (potential and counter
measures) of Flawless and Risk Management in its discipline (KSA instrument)
ü Has capability to review
Check-sheet, Installation Procedure,Pre-Commissioning Procedure, Loop Test
Procedure.Hydraulic Flushing Procedure, etc.
ü Experience In reviewing
Contractor Engineering document such as P&ID, Datasheet, Calculation,
Layout, Installation Detail, Overall Cable Block Diagram, and ICS5 (PCS and
SSS) System
ü Guide and supervise
Contractor during construction activity for Field and Control Instrument.
ü Has capability in
reviewing System/sub system list up, boundary limit and document deliverables
for Instrument
ü Has capability in
reviewingCompleteness Calibration of field instrument
ü Has capability In
reviewing all related database for Instrument using CMS namely TOMAS
ü Has capability in
reviewing and inspecting all vendor packages and raise punch list and NCR's if
required.
ü Familiar with Contractor
daily Commissioning activities (walk-down, line-up, field calibration,
etcetera)
ü Understand with CSU PTW
(LOTO, IA, LUN, Energy Isolation, etcetera)
ü Safety oriented, healthy
and good personality
ü ■ Min.10 years of progressiveexperience in pre-commissfcjning, commissioning and plant start-up activities within Oil & Gas Industries (development and production)
ü Musi have hands-on experience dealing with various type of electrical equipment, applicable lest and Its trouble shoot.
ü Able to work independently (in long hours) with minimum supervise
ü Conversant in English is a must
ü Understand Flawless risk (potential and counter measures) in Electrical and shall able to monitor implemented of Flawless and Risk Management in its discipline (KSA Electrical)
ü Experience in reviewing and monitoring all preparations. Electrical equipment's installation and hookup processes, contractor inspections, and testing during the site fabrication.
ü Capable to ensure that the activities of the EPC Contractor inspectors are conducted to the appropriate quality and safety standards. To ensure that EPC Contractor Inspection and Test activities is comply with the approved ITP and applicable Manual and Procedures.
ü Has capability to review and approve Electrical CSU Deliverables, temporary equipment and proposed testing tools
ü Experience in reviewing, inspecting all vendor packages and raise punch list and NCR's if required.
ü Has capability to review and ensure that all test sheets and certification are complete and filed under the correct system Including NCR’s and punches lists as relevant.
ü Guide and ensuring that all the work is performed by Contractor in accordance with Company safety and environmental specifications.
ü Has capability to advise all preparations ofElectrical equipment's installation and hookup processes, inspections, and testing during the site fabrication and commissioning activities.
ü H3S capability to guide that the activities of the EPC Contractor complywIthElectrical quality and safety standards and with the approved ITP and applicable Manual and Procedures.
ü Capable to assist Contractor to solve problem and/or raised issues to related discipline if the problems were arisen during commissioning and start-up phase
ü Understand CMS - integrated data base for mechanical completion, pre-commissioning and commissioning test sheet and dossier for Commissioning Acceptance/Certificate.
ü Capable to support Operation teams during start-up for safe and stable operation
ü Understand with CSU PTW (LOTO, IA, LUN, Energy Isolation, etcetera)
ü ■ Min.10 years of progressiveexperience in pre-commissfcjning, commissioning and plant start-up activities within Oil & Gas Industries (development and production)
ü Musi have hands-on experience dealing with various type of electrical equipment, applicable lest and Its trouble shoot.
ü Able to work independently (in long hours) with minimum supervise
ü Conversant in English is a must
ü Understand Flawless risk (potential and counter measures) in Electrical and shall able to monitor implemented of Flawless and Risk Management in its discipline (KSA Electrical)
ü Experience in reviewing and monitoring all preparations. Electrical equipment's installation and hookup processes, contractor inspections, and testing during the site fabrication.
ü Capable to ensure that the activities of the EPC Contractor inspectors are conducted to the appropriate quality and safety standards. To ensure that EPC Contractor Inspection and Test activities is comply with the approved ITP and applicable Manual and Procedures.
ü Has capability to review and approve Electrical CSU Deliverables, temporary equipment and proposed testing tools
ü Experience in reviewing, inspecting all vendor packages and raise punch list and NCR's if required.
ü Has capability to review and ensure that all test sheets and certification are complete and filed under the correct system Including NCR’s and punches lists as relevant.
ü Guide and ensuring that all the work is performed by Contractor in accordance with Company safety and environmental specifications.
ü Has capability to advise all preparations ofElectrical equipment's installation and hookup processes, inspections, and testing during the site fabrication and commissioning activities.
ü H3S capability to guide that the activities of the EPC Contractor complywIthElectrical quality and safety standards and with the approved ITP and applicable Manual and Procedures.
ü Capable to assist Contractor to solve problem and/or raised issues to related discipline if the problems were arisen during commissioning and start-up phase
ü Understand CMS - integrated data base for mechanical completion, pre-commissioning and commissioning test sheet and dossier for Commissioning Acceptance/Certificate.
ü Capable to support Operation teams during start-up for safe and stable operation
ü Understand with CSU PTW (LOTO, IA, LUN, Energy Isolation, etcetera)
ü Safety oriented, healthy
and good personality
ü Min.10 years of
progresstveexperience in pre-commissioning, commissioning and start-up
activities for plant and pipeline within Oil & Gas Industries (development
and production)
ü Must have hands-on
experience dealing with various type and piping class, applicable test and its
trouble shoot.
ü Able to work
independently (in long hours) with minimum supervise
ü Conversant in English is a must
ü Understand Flawless risk
(potential and counter measures) implemented of Flawless and Risk Management in
Its discipline
ü Understand to review
Schedules for piping and pipeline,status index for pipeline &pig launcher
and receiver for mechanical completion and commissioning.review execution and
progress driving & monitoring.
ü Able to review piping
engineering documents, Technical Query, Piping detail drawing using applicable
code and internationally accepted practices.
ü Able to review Piping /
Pipeline Deliverable List issuance by Contractor shall be accordance to
commissioning and start up project standard.
ü Has capability to review
field mechanical-piping activities and observed the record existing field
conditions, take and verify measurement within project area.
ü Experience in reviewing
mark-up system & sub-system limit and test package, mechanical completion
activities le. Pipe Flushing, Hydrotesting and Drying including vessel and
piping reinstatement. Guide Contractor in preparing pipe network and associated
pipeline ready for test.
ü Experience In
reviewmgmechanical-piping commissioning procedures, mark-up system and
sub-system limit, gross leak test, N2-He Leak Test up to Final and String Test
(Commissioning)
ü Understand CMS •
integrated data base for mechanical completion, pre-commissioning and
commissioning test sheet and dossier for Commissioning Acceptance/Certificate.
ü Experience in reviewing
and confirm Punch List clearances which related to priorities of
pre-commissioning& commissioning.
ü Understand with PTW
(LOTO, IA, LUN, Energy Isolation, etcetera)
5. CSU Process Utility (Non-License)
Engineer
ü Safety oriented, healthy
and good personality
ü Min.10 years of
progressive experience in pre-commissioning, commissioning and start-up
activities for plant and pipeline within Oil & Gas Industries (development
and production)
ü Must have hands-on
experience dealing with various type of process equipment, applicable test and
its trouble shoot.
ü Able to work
independently (in long hours) with minimum supervise
ü Conversant in English is
a must
ü Understand Flawless risk
(potential and counter measures) in plant process utility, shall able to
monitor implemented of Flawless and Risk Management In Its utility coverage
system (KSA process utility)
ü Experience in assisting
preparation, execution, commission and plant start-up upto first 1 cycle
operation.
ü Capable to advise and
guide Contractor start-up team during tuning and trimmingthe plant
ü Has experience to review
and guide dynamic commissioning activities and give advice to Operation team
ü Capable to review of all
systems boundaries and mark-up drawings and maric-up
ü Capable to review
Contractor Process Utility deliverables with regard to CSU and Turnover
(non-license).
ü Has experience in
reviewing and ensuring Commissioning and start-up of plants as per
specification and design
ü Capable to analyze
Safety factor from process safety point of view
ü Has capability to assist
CSU PTW Team In reviewing application of Permit To work, Job safety Analysis,
Task Hazard Assessment for Commissioning Activities to ensure that
commissioning In safe condition, especially for SIMOPS
ü Capable to advise
Contractor in problem solving and/or raised issues to related discipline if the
problems were arisen during commissioning and start-up phase
ü Capable to advise
Operation teams during start-up for safe and stable operation
ü Capable to review static
and dynamic commissioning procedures for utility systems (process non-license)
and P&ID's marking of all utility system process related sub-systems
boundaries
ü Understand with PTW
(LOTO, IA, LUN, Energy Isolation, etcetera)
B. Supervisor
ü Safety oriented, healthy
and good personality
ü Must have hands-on
experience dealing with ICSS and its trouble shoot
ü Min. 15 years of
progressive experience in pre-commissioning, commi within Oil & Gas
Industries (development and production)
ü Able to work
independently (in long hours) with minimum supervise
ü Conversant In English is
an advantage.
ü Understand Integrated
Control and Safety System (ICSS) Including several mechanical packages from
Factory Acceptance Test (FAT), Construction, Pre-Commissioning and will be
supporting Contractor Commissioning team as well.
ü Has experience dealing
with Flawless risk (potential and counter measures) in Control System and shall
able to monitor implemented of Flawless and Risk Management in its discipline
(KSA Control/Plant Automation) is an advantage
ü Experience in attending
Integrated Control and Safety System (ICSS) Factory Acceptance Test is an
advantage
ü Understand about Control
Narrative, Cause and Effect, Vendor document, Loop drawing etcetera.
ü Knowing with
work-packages procedure for tie-in & system upgrade.
ü Experience in reviewing
DCS/lnstrument pre-commissioning check sheets.
ü Has experience in
reviewing System/sub system list up, boundary limit and document deliverables
for Automation system
ü Capable to assist
Contractor construction activity for ICSS & other mechanical packages.
ü Has experience in
managing coordination with other discipline for pre-commissioning &
commissioning plan, handover target & execution.
ü Experience in ICSS
upgrade activity & ICSS tie in activity.
ü Has capability to review
test procedures eg. SAT, loop test & function test of Integrated Control &
Safety System (ICSS) and other mechanical packages.
ü Experience in Inspecting
all vendor packages and raise punch list and NCR's if required.
ü Capable to supervise
Contractor in their dally commissioning activity
ü Understand CMS -
integrated data base for mechanical completion, pre-commissioning and
commissioning test sheet and dossier for Commissioning Acceptance/Certlficate
(s an advantage.
ü Understand and familiar
with PTW (LOTO, IA, LUN, Energy Isolation, etcetera)
ü Capable to support
operation teams during start-up for safe and stable operation
2. CSU Field Instrument Supervisor
ü Safety oriented, healthy
and good personality
ü Min. 15 years of
progressive experience in pre-commissioning, commissioning and plant start-up
activities within Oil & Gas Industries (development and production)
ü Must have hands-on
experience dealing with various type of field instrument (hardware) and its
trouble shoot.
ü Able to work
independently (in long hours) with minimum supervise
ü Conversant In English is
an advantage
ü Understand Instrument
document deliverables eg. Specification. Installation Details, Control
Philosophy, Instrument Index, Instrument I/O List, Trouble Shooting, Loop
Diagram, Datasheet, Etc.
ü Understand Flawless risk
(potential and counter measures) in Instrumentation and shall able to monitor
implemented of Flawless and Risk Management in its discipline (KSA Instrument)
ü Has capability to review
Check-sheet, Installation Procedure, Pre-Commissioning Procedure, Loop Test
Procedure, Hydraulic Flushing Procedure, etc.
ü Experience in reviewing
Contractor Engineering document such as P&ID, Datasheet, Calculation,
Layout, Installation Detail, Overall Cable Block Diagram, and ICSS (PCS and
SSS) System
ü Capable to supervise
Contractor during construction activity for Field and Control Instrument.
ü Has capability in
reviewing Completeness Calibration of fieid instrument
ü Has capability in
reviewing all related database for Instrument using CMS is an advantage
ü Has capability in
reviewing and inspecting all vendor packages and raise punch list and NCR's if
required.
ü Guide Contractor for
daily Commissioning activities (walk-oown, line-up, field calibration,
etcetera)
ü Understand and familiar
with PTW (LOTO, IA, LUN, Energy Isolation, etcetera)
ü Capable to support
operation teams during start-up for safe and stable operation
ü Safety oriented, healthy
and good personality
ü Min.15 years of
progressive experience in pre-commissioning, commissioning and plant start-up
activities within Oil & Gas Industries (development and production)
ü Must have hands-on
experience dealing with various type of electrical equipment applicable test
and its troubleshoot.
ü able to work
independently (in long hours) with minimum supervise
ü Conversant in English Is
an advantage
ü Understand Flawless risk
(potential and counter measures) in Electrical and shall able to monitor
implemented of Flawless and Risk Management In its discipline (KSA Electrical)
ü Experience in monitoring
all preparations, Electrical equipment's installation and hookup processes,
contractor inspections, and testing during the site fabrication.
ü Capable to ensure that
the activities of the EPC Contractor inspectors are conducted to the
appropriate quality and safety standards.
ü Has capability to review
and approve Electrical CSU Deliverables, temporary equipment and proposed
testing tools
ü Experience inlnspectlng
all vendor packages and raise punch list and NCR's if required.
ü Has capability to review
and ensure that all test sheets and certification are complete and filed under
the correct system including NCR’s and punches lists as relevant.
ü Guide and ensuring that
all the work is performed by Contractor in accordance with Company safety and
environmental specifications.
ü Has capability to advise
all preparations of Electrical equipment's Installation and hookup processes,
inspections, and testing during the site fabrication and commissioning
activities.
ü Has capability to guide
that the activities of the EPC Contractor comply with Electrical quality and
safety standards and with the approved ITP and applicable Manual and
Procedures.
ü Capable to assist
Contractor to solve problem and/or raised Issues to related discipline if the
problems were arisen during commissioning and start-up phase
ü Understand CMS -
integrated data base for mechanical completion, pre-commissioning and
commissioning test sheet and dossier for Commissioning Acceptance/Certificate
is an advantage
ü Understand and familiar
with PTW (LOTO, IA, LUN, Energy Isolation, etcetera)
ü Capable to support
Operation teams during start-up for safe and stable operation
ü Safety oriented, healthy
and good personality
ü Min. 20 years of
progressive experience in pre-commissioning, commissioning and start-up
activities for plant and pipeline within Oil & Gas Industries (development and
production)
ü Must have hands-on
experience dealing with various type and piping class, applicable test and its
trouble shoot.
ü Able to work
independently (in long hours) with minimum supervise
ü Conversant in English is
an advantage
ü Understand Flawless risk
(potential and counter measures) in piping and pipeline, shall able to monitor
Implemented of Flawless and Risk Management in its discipline (KSA piping and
pipeline)
ü Understand to review
Schedules for piping and pipeline, status index for pipeline & pig launcher
and receiver for mechanical completion and commissioning, review execution and
progress driving & monitoring.
ü Familiar with piping
engineering documents, Technical Query, Piping detail drawing using applicable
code and internationally accepted practices.
ü Has capability to review
field mechanical-piping activities and observed the record existing field
conditions, take and verify measurement within project area.
ü Experience in reviewing
mark-up system & sub-system limit and test package, mechanical completion
activities ie. Pipe Flushing, Hydrotesting and Drying including vessel and
piping reinstatement.
ü Capable to guide
Contractor in preparing pipe network and associated pipeline ready for test.
ü Experience in reviewing
mechanical-piping commissioning procedures, mark-up system and sub-system
limit, gross leak test, N2-He Leak Test up to Final and String Test
(Commissioning)
ü Understand CMS -
integrated data base for mechanical completion, pre-commissioning and
commissioning test sheet and dossier for Commissioning Acceptance/Certificate
is an advantage
ü Experience in reviewing
and confirm Punch List clearances which related to priorities of
pre-commissioning & commissioning.
ü Understand and familiar
with CSU PTW (LOTO, IA, LUN, Energy Isolation, etcetera)
ü Capable to support
operation teams during start-up for safe and stable operation
5.
CSU Process Safety (License)
Supervisor
- ü Safety oriented, healthy and good personality
- ü Min. 20 years of progressive experience in pre-commissioning, commissioning and start-up activities for plant and pipeline within Oil & Gas Industries (development and production)
- ü Must have hands-on experience dealing with various type of process equipment, applicable test and its trouble shoot.
- ü Able to work Independently (in long hours) with minimum supervise
- ü Conversant in English is anadvantage
- ü Understand Flawless risk (potential and counter measures) in plant process control, shall able to monitor implemented of Flawless and Risk Management in its discipline (KSA process safety)
- ü Understand about preparation, execution, commission and plant start-up upto first 1 cycle operation.
- ü Understand Safety factor from process safety point of view - especially for lethal process
- ü Must understand PID and PFD
- ü Shall familiar with process equipment characteristic
- ü Understand all testing steps for Process systems (license - AGRU, AGEU & SRU).
- ü Understand dynamic commissioning procedures and P&ID's marking of all process related sub-systems boundaries
- ü Understand on how to assist CSU PTW Team in reviewing application of Permit To work. Job safety Analysis, Task Hazard Assessment for Commissioning Activities to ensure that commissioning In safe condition, •
- ü Understand and familiar with CSU PTW (LOTO, IA, LUN, Energy Isolation, etcetera Especially SIMOPS for lethal process
- ü Capable to assist Contractor to sotve problem and/or raised issues to related discipline if the problems were arisen during commissioning and start-up phase
- ü Capable to support operation teams during start-up for safe and stable operation
6. CSU Process Safety (Non-License)
Supervisor
- Safety oriented, healthy and good personality
- Min.20 years of progressive experience In pre-commissioning, commissioning and start-up activities for plant and pipeline within Oil & Gas Industries (development and production)
- Must have hands-on experience dealing with various type of process equipment, applicable test and its trouble shoot.
- Able to work independently (in long hours) with minimum supervise
- Conversant in English Is an advantage
- Understand Flawless risk (potential and counter measures) in plant process control, shall able to monitor Implemented of Flawless and Risk Management inutility coverage system (KSA process utility)
- Understand about preparation, execution, commission and plant start-up upto first 1 cycle operation.
- Understand Safety factor from utility process safety point of view
- Must understand PID and PFD
- Shall familiar with utility equipment characteristic
- Understand all testing steps for Process Utility systems (non-license - Power Plant, PA/IA, N2, Flares, Fuels System, Water systems eg. Raw, Demineralized, Fire, Steam etcetera).
- Understand dynamic commissioning procedures and P&ID's marking of all process utility related sub-systems boundaries
- Understand on how to assist CSU PTW Team in reviewing application of Permit To work, Job safety Analysis, Task Hazard Assessment for Commissioning Activities to ensure that commissioning in safe condition, •
- Understand and familiar with CSU PTW (LOTO, IA, LUN, Energy Isolation, etcetera) especially for SIMOPS
- Capable to assist Contractor to solve problem and/or raised issues to related discipline if the problems were arisen during commissioning and start-up phase
- Capable to support operation teams during start-up for safe and stable operation
PERSYARATAN UMUM
1.
Putra-Putri daerah Aceh (berdomisili di
Provinsi Aceh).
2.
Sehat jasmani dan rohani
3.
Memiliki kemampuan berbahasa Indonesia dan
Inggris yang baik
TAHAPAN SELEKSI
1.
Seleksi administrasi by kontraktor
->Seleksi Teknis By user ->Tes/ Wawancara -»Tes Kesehatan By Kontraktor
2.
Semua tahapan seleksi akan diiaksanakan di
Aceh Timur
3.
Hanya pelamar yang memenuhi persyaratan
yang akan mengikuti tahapan seleksi dan akan diumumkan di:
a. Kantor Dinas Sosial, Tenaga Kerja, dan
Mobilitas Penduduk Kabupaten Aceh Timur
PERSYARATAN ADMINISTRASI
Melampirkan:
- Fotokopi KTP Aceh.
- Fotokopi Kartu Keluarga yang dilegalisir oleh Kepala Desa/Keuchik.
- Akte Kelahiran/Surat Kenal Lahir.
- Curriculum Vitae (CV) / Daftar Riwayat Hidup terbaru.
- Ijazah dan daftar nilai terakhir (dilegalisir).
- AK-1 (KartuPencariKerja).
- Pas foto berwarna (terbaru) dengan latar biru ukuran 3x4 (3 lembar).
- Surat keterangan tidak buta warna dari Rumah Sakit.
- Mencantumkan nomor telepon (ponsel/rumah) yang bisa dlhubungi.
CARA PENDAFTARAN
Berkas lamaran sesuai persyaratan
administrasi dimasukkan keamplop coklat ukuran folio dan berkas lamaran dikirim
via
PO BOX 101
Kantor Pos IDI
Jl. Mansur No. 02. Gampong Jawa
Idi Rayeuk - Aceh Timur 24454.
Penerimaan berkas diterima paling lambat
tanggal 17 Oktober 2016.
0 komentar:
Posting Komentar